Removable Vinyl
Peel-and-Stick
Smooth removable vinyl with a pressure-sensitive adhesive backing.
Adhesive
No additional adhesive required.
SPLASH / Wallpaper
Choose the surface.
Then configure the roll.
Every SPLASH surface is offered as wallpaper. Select a material below, then choose the roll size and wallcovering media on the next page.
Unit size24.5" wide × 16' or 33'
Price basis$6.00 / sq ft
Package1 roll
Package price$196.00 / $404.25
Coverage32.67 / 67.38 sq ft
Shipping weight3 lb / 4 lb
Pattern structureNon-repeating
Each roll contains a non-repeating material pattern optimized for wall placement.
Step 1
Choose your surface.
42 surfaces are ready to order now. Selecting a surface takes you directly to size and media configuration.
Marble
Calacatta Gold
Marble
Statuario
Marble
Nero Marquina
Marble
Carrara White
Marble
Rosso Levanto
Marble
Emperador Dark
Marble
Verde Alpi Gold
Granite
Black Galaxy
Granite
Blue Pearl
Granite
Absolute Black
Granite
Ubatuba
Granite
White Ice
Granite
Silver Cloud
Granite
Baltic Brown
Gemstone / Onyx
Malachite
Gemstone / Onyx
Labradorite
Gemstone / Onyx
Honey Onyx
Gemstone / Onyx
Emerald Quartzite
Gemstone / Onyx
Blue Onyx
Gemstone / Onyx
Amethyst
Gemstone / Onyx
Rose Quartz
Wood
Walnut Burl
Wood
Karelian Birch
Wood
Olive Wood
Wood
Ebony
Wood
Zebrawood
Wood
Teak
Wood
Wenge
Metal
Brushed Brass
Metal
Antique Bronze
Metal
Copper
Metal
Champagne Gold
Metal
Black Steel
Metal
Brushed Stainless
Metal
Patinated Steel
Architectural
Travertine
Architectural
Concrete
Architectural
Limestone
Architectural
Sandstone
Architectural
Slate
Architectural
Brick
Architectural
Ribbed
01Surface
Choose the SPLASH material.
02Roll size
24.5" × 16' or 24.5" × 33'
03Media
Removable Vinyl / Paste-the-Wall / Textured Fiber
04Checkout
Review size, media, quantity, weight, and pricing before secure payment.
Three wallcovering media
Same SPLASH surface. Different installation system.
Paste-the-Wall
Traditional Non-Woven
Professional non-woven wallcovering installed by applying adhesive directly to the wall.
Adhesive
Recommended: ROMAN PRO-880 Ultra Clear Strippable Wallcovering Adhesive, or an equivalent clear adhesive approved for non-woven wallcoverings.
Textured Fiber
Natural Grasscloth
Natural woven fiber for a tactile, elevated wallcovering finish.
Adhesive
Recommended: ROMAN GH-34 Wheat-Based Paste, or an equivalent non-staining adhesive approved for natural-fiber wallcoverings. Professional installation is strongly recommended.
Installation guide
Install for the material.
Always follow the adhesive and wallcovering manufacturer instructions and verify compatibility with the wall surface before installation.
Before you begin
- Inspect the wall and repair holes, cracks, loose paint, or uneven areas before installation.
- The wall must be smooth, clean, dry, dust-free, and fully cured before wallcovering is applied.
- Remove switch and outlet covers and establish a true vertical plumb line for the first panel.
- Plan the complete wall layout before installation. SPLASH artwork is non-repeating, so conventional pattern-repeat measurements do not apply.
Removable Vinyl
Peel-and-Stick
- No additional paste is required; the material has its own pressure-sensitive adhesive backing.
- At the top of the wall, peel back only a short section of the release liner and align the first panel to the plumb line.
- Work downward gradually, removing the liner as you smooth the material from the center toward the edges.
- Use a clean felt-edge squeegee or soft smoothing tool. Avoid stretching the vinyl during application.
- Trim cleanly at ceilings, baseboards, corners, switches, and outlets with a sharp blade.
Paste-the-Wall
Traditional Non-Woven
- Apply a compatible wallcovering adhesive evenly to the wall rather than soaking the wallpaper.
- Recommended adhesive: ROMAN PRO-880 Ultra Clear Strippable Wallcovering Adhesive, or an equivalent clear adhesive approved for non-woven wallcoverings.
- Place the dry panel into the wet adhesive and align it to the plumb line.
- Smooth gently from the center outward and butt adjoining panels carefully without overlapping them.
- Remove excess adhesive promptly with a clean damp sponge, then trim at ceilings, baseboards, and openings.
- Allow the installation to dry naturally with normal room ventilation.
Textured Fiber
Natural Grasscloth
- Professional installation is strongly recommended for natural grasscloth.
- Recommended adhesive: ROMAN GH-34 Wheat-Based Paste, or an equivalent non-staining adhesive specifically approved for natural-fiber wallcoverings.
- Apply adhesive evenly according to the adhesive manufacturer's instructions and avoid contaminating the visible fiber face.
- Position the panel carefully and smooth it with a soft wallcovering brush rather than aggressive pressure.
- Butt seams carefully. Natural fibers can make seams and tonal variation more visible; this is part of the material character.
- Allow the wallcovering to dry gradually under normal indoor conditions.